Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Light bulb

To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. Once the inner fender cover is removed, access the circular cover inside and pull it out. Behind the cover is the bulb, which needs to be disconnected from its connector and removed from its housing. This way, you can connect the new bulb to the connector and insert it back into its housing.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Lights on a Chevrolet Equinox?
How to Replace the Tail Lights on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this video, see how to remove the tail lights from a Chevrolet Equinox, a task to perform if you need to replace a burnt-out bulb or the light its…
How to Remove the Headlight from a Chevrolet Equinox?
How to Remove the Headlight from a Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) To remove the headlight from a Chevrolet Equinox, pry at the bottom of the front trim piece to detach it. Once this trim is removed, open the hood to…
How to Change the Headlight Bulb on a Chevrolet Equinox
How to Change the Headlight Bulb on a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) The selected video tutorial shows how to replace the headlight bulb on a Chevrolet Equinox. Get in the vehicle, pull the internal lever to release th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos