Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb on a Chevrolet Equinox

Model: Chevrolet Equinox MK 3 - Years 2018-2025
Part: Headlight bulb

The selected video tutorial shows how to replace the headlight bulb on a Chevrolet Equinox. Get in the vehicle, pull the internal lever to release the hood, and lift it, securing it in place with the prop rod. Identify the air duct and remove it by unscrewing the bolts with a 10mm wrench; once the air duct is removed, you will have access to the back of the headlight. Remove the plastic cover over the bulb by turning it counterclockwise. Disconnect the electrical connector from the burnt-out bulb, turn it counterclockwise, and pull it out; at this point, insert the new bulb and turn it clockwise to secure it, reconnect the connector, and replace the rear cover of the headlight.

Posted on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Chevrolet Equinox
How to Replace the Headlight Bulb on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. On…
How to Replace the Tail Lights on a Chevrolet Equinox?
How to Replace the Tail Lights on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this video, see how to remove the tail lights from a Chevrolet Equinox, a task to perform if you need to replace a burnt-out bulb or the light its…
How to Replace the Headlight Bulbs on the Chevrolet Equinox
How to Replace the Headlight Bulbs on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this video, you can see how to replace the headlight bulbs, possibly with a more efficient LED model. To access the back of the headlight (startin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos