Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Headlight bulb

In this video, you can see how to replace the headlight bulbs, possibly with a more efficient LED model. To access the back of the headlight (starting with the driver’s side), turn the steering wheel all the way to the left to access the inner fender where there is a small door secured with a screw that needs to be removed. Then, reach into the compartment and twist the protective cover of the bulb to remove it. Disconnect the connector and pull out the bulb. At this point, you can replace the bulb and proceed to reassemble the various components in reverse order.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the rear headlight bulb on a Chevrolet Equinox, open the trunk to access the screws located between the headlight and the seal. After loos…
How to Remove the Headlight from a Chevrolet Equinox?
How to Remove the Headlight from a Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) To remove the headlight from a Chevrolet Equinox, pry at the bottom of the front trim piece to detach it. Once this trim is removed, open the hood to…
How to replace the rear taillight bulbs of the Chevrolet Equinox.
How to replace the rear taillight bulbs of the Chevrolet Equinox.
Chevrolet Equinox (2010-2017 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear light bulbs of the Chevrolet Equinox. First, let's open the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos