Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel and Airbag from the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Steering wheel

See other generations:
Video tutorial

In this guide, you will learn how to remove and replace the steering wheel and its airbag from the Chevrolet Equinox. First, get inside the vehicle and start by removing the steering wheel by pushing on the holes located at the back.

Next, disconnect the airbag electrical connector, as shown in the video. At this point, remove the central screw of the steering wheel while keeping it perfectly straight (to have a reference for reinstallation), as illustrated in the video.

Then, install the new steering wheel and subsequently its airbag!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a Chevrolet Equinox?
How to Remove the Steering Wheel Airbag from a Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) To remove the steering wheel airbag from a Chevrolet Equinox, insert special keys into the holes located at the back of the steering wheel. This will…
How to Remove the Steering Wheel Airbag from the Chevrolet Equinox
How to Remove the Steering Wheel Airbag from the Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) In this guide, you will find the main instructions to disassemble and replace the steering wheel airbag of the Chevrolet Equinox. First, get inside t…
How to Remove the Steering Wheel Airbag on the Chevrolet Equinox?
How to Remove the Steering Wheel Airbag on the Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) To remove the steering wheel airbag, you need to fully rotate the steering wheel so that you can access the clips at the back of the steering wheel w…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos