Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from a Chevrolet Equinox?

Model: Chevrolet Equinox MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Airbag

See other generations:
Video tutorial

To remove the steering wheel airbag from a Chevrolet Equinox, insert special keys into the holes located at the back of the steering wheel. This will release the airbag retaining clips, allowing you to disconnect the connectors inside.

Once all the fasteners are removed, you can completely detach the airbag to install the new one. Attach the new airbag in its place, connect the connectors, and verify that everything functions correctly.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel and Airbag from the Chevrolet Equinox
Removing the Steering Wheel and Airbag from the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, you will learn how to remove and replace the steering wheel and its airbag from the Chevrolet Equinox. First, get inside the vehicle a…
How to Remove the Steering Wheel Airbag from the Chevrolet Equinox
How to Remove the Steering Wheel Airbag from the Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) In this guide, you will find the main instructions to disassemble and replace the steering wheel airbag of the Chevrolet Equinox. First, get inside t…
How to Remove the Steering Wheel Airbag on the Chevrolet Equinox?
How to Remove the Steering Wheel Airbag on the Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) To remove the steering wheel airbag, you need to fully rotate the steering wheel so that you can access the clips at the back of the steering wheel w…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos