Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How do I remove the Chevrolet Equinox steering wheel airbag?

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 3 - Years 2018-2024
Part: Airbags
Operation: How do I remove the Chevrolet Equinox steering wheel airbag?

In order to remove the steering wheel airbag, you have to turn the steering wheel completely, so that with the special keys it is possible to open the hooks in the rear part of the steering wheel. By inserting the keys in the appropriate slots and opening these hooks, it will be possible to remove the airbag from inside the steering wheel, also disconnecting the connectors in the rear part of the airbag. In this way the part will be completely freed and it will be possible to replace it with a new spare part. This will have to be connected to the connectors and wedged inside its housing in the steering wheel.


Posted on 19 April 2024 by ScegliAuto



Disassembly of the steering wheel and airbag of the Chevrolet Equinox.
Chevrolet Equinox (2010-2017 / MK 2) In this guide, we will see the procedure that will allow us to disassemble and replace the steering wheel and its airbag of the Chevrolet Equinox. Fi
How to remove the steering wheel airbag of the Chevrolet Equinox.
Chevrolet Equinox (2018-2024 / MK 3) In this guide, we will see the main instructions that will allow us to disassemble and replace the steering wheel airbag of the Chevrolet Equinox. Fi
How do you remove the steering wheel airbag of the Chevrolet Equinox?
Chevrolet Equinox (2018-2024 / MK 3) In order to remove the steering wheel airbag of the Chevrolet Equinox, it will be necessary to insert special keys into the holes located in the back

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos