Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from the Chevrolet Equinox

Model: Chevrolet Equinox MK 3 - Years 2018-2025
Part: Airbag

In this guide, you will find the main instructions to disassemble and replace the steering wheel airbag of the Chevrolet Equinox. First, get inside the vehicle and start pushing on the rear holes of the steering wheel using thin, pointed tools to detach the airbag from the steering wheel; then disconnect the electrical connector, as shown in the video. At this point, remove the central screw if you want to take off the steering wheel as well; then replace the airbag with the new one and reassemble everything by reconnecting the electrical connection, following the reverse procedure of disassembly!

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel and Airbag from the Chevrolet Equinox
Removing the Steering Wheel and Airbag from the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, you will learn how to remove and replace the steering wheel and its airbag from the Chevrolet Equinox. First, get inside the vehicle a…
How do you remove the steering wheel airbag of the Chevrolet Equinox?
How do you remove the steering wheel airbag of the Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) In order to remove the steering wheel airbag of the Chevrolet Equinox, it will be necessary to insert special keys into the holes located in the back…
How to Remove the Steering Wheel Airbag on the Chevrolet Equinox?
How to Remove the Steering Wheel Airbag on the Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) To remove the steering wheel airbag, you need to fully rotate the steering wheel so that you can access the clips at the back of the steering wheel w…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos