Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : Headlight bulb

Chevrolet Equinox - Headlight bulb

Chevrolet Equinox (2010-2017 / MK 2)
How to replace headlight bulbs on Chevrolet Equinox
In this video we can see how to replace the headlight bulbs perhaps with a more performing LED model. To access the rear part of the car headlight (driver's …read all…
Posted on 5 December 2022 by ScegliAuto
Airbags (3) Loudspeaker (1) Shock absorbers (1) Car stereo (2) Battery (7) Spark plugs (2) Bodywork (2) Key (15) Air conditioning controls (1) -board computer (8) Checks and maintenance (7) Mass air flow sensor (1) Headlight (4) Tail light (1) Air filter (7) Cabin air filter (4) Oil filter (1) Light bulb (2) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) License plate light (2) Handle (2) Starter motor (1) Engine oil (1) Door panel (2) Front bumper (3) Tires (1) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (2) Outside rearview mirror (2) Windscreen wipers (4) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos