Do it yourself
| ||||
|
Chevrolet Equinox - Headlight
Chevrolet Equinox (2005-2009 / MK 1)
How do you remove the front headlight of a Chevrolet Equinox? To remove the front headlight of the Chevrolet Equinox, you need to pry at the bottom of the car's front molding so that it can be removed. After this molding …read all… Posted on 17 April 2023 by ScegliAuto
Chevrolet Equinox (2010-2017 / MK 2)
How to replace the headlights of the Chevrolet Equinox Let's see in this short and simple guide how to disassemble and replace the headlights of the Chevrolet Equinox, following the instructions below. First of all …read all… Posted on 5 October 2022 by ScegliAuto
Chevrolet Equinox (2010-2017 / MK 2)
How to replace the headlights on the Chevrolet Equinox Although it may seem like a rather complicated and difficult operation, replacing the vehicle's front light is actually very simple. Before proceeding with the …read all… Posted on 30 November 2022 by ScegliAuto
Chevrolet Equinox (2010-2017 / MK 2)
How to replace the low beam bulbs on the Chevrolet Equinox Mk2 The guide shows how to replace the Chevrolet Equinox Mk2 low beam bulb. This operation is quick and easy to perform. The first step is to secure the vehicle …read all… Posted on 17 June 2022 by ScegliAuto Airbags (3) Loudspeaker (1) Shock absorbers (1) Car stereo (2) Battery (7) Spark plugs (2) Bodywork (2) Key (15) Air conditioning controls (1) -board computer (8) Checks and maintenance (7) Mass air flow sensor (1) Headlight (4) Tail light (1) Air filter (7) Cabin air filter (4) Oil filter (1) Light bulb (2) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) License plate light (2) Handle (2) Starter motor (1) Engine oil (1) Door panel (2) Front bumper (3) Tires (1) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (2) Outside rearview mirror (2) Windscreen wipers (4) Steering wheel (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |