Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Bulbs on a Chevrolet Equinox Mk2

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Headlight

This guide shows how to replace the low beam bulb on a Chevrolet Equinox Mk2. This operation is simple and quick to perform. First, secure the vehicle and turn the wheels to one side to create more working space in the wheel housing. Next, remove the Torx T20 screw and detach the clips securing the wheel well; using a 7mm wrench, remove the two bolts located at the bottom of the bumper. At this point, you can move the wheel well liner to access the protective plastic cap of the bulb holder; unscrew this element to proceed with the replacement. Now you can remove the old bulb and replace it with a new one. Do not touch the glass of the new bulb with your hands as it may deteriorate more quickly. Check the proper functioning before hitting the road.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear taillight bulbs of the Chevrolet Equinox.
How to replace the rear taillight bulbs of the Chevrolet Equinox.
Chevrolet Equinox (2010-2017 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear light bulbs of the Chevrolet Equinox. First, let's open the…
Where are the fuses located in the Chevrolet Equinox?
Where are the fuses located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) The fuses in the Chevrolet Equinox are located within the dedicated fuse boxes present in the vehicle. This model has two: one is inside the cabin, o…
How to Replace the License Plate Lights in a Chevrolet Equinox
How to Replace the License Plate Lights in a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) Today, see how to replace the license plate lights in a Chevrolet Equinox and how to remove the bulb cover. Use a plastic pry tool to leverage the cl…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos