Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight bulbs of the Chevrolet Equinox.

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the rear light bulbs of the Chevrolet Equinox. First, let's open the rear hatch of the trunk and start removing the side caps of the light, using a socket wrench to unscrew the two screws; then we remove the rear light by disconnecting the electrical connector of the bulbs, as shown in the video.

At this point, we remove and replace any faulty bulbs of the rear light, ensuring they have the same fitting and wattage; finally, we reassemble the rear light!


Posted on 24 December 2025 by ScegliAuto


Related tutorials

How to Replace the Tail Lights on a Chevrolet Equinox?
How to Replace the Tail Lights on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this video, see how to remove the tail lights from a Chevrolet Equinox, a task to perform if you need to replace a burnt-out bulb or the light its…
How to Replace the Key Battery in a Chevrolet Equinox 2
How to Replace the Key Battery in a Chevrolet Equinox 2
Chevrolet Equinox (2010-2017 / MK 2) If the key for your Chevrolet Equinox second generation (model year 2010-2017) suddenly stopped working and you want to replace the battery inside, f…
How to Know the Fuse Diagram of a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This video tutorial shows the fuse diagrams for a Chevrolet Equinox. The box located inside the engine compartment has fuses assigned to: ventilation…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos