Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Tail light

In this video, see how to remove the tail lights from a Chevrolet Equinox, a task to perform if you need to replace a burnt-out bulb or the light itself. Start by opening the trunk and removing the two indicated plastic caps; beneath them are the screws securing the light. Remove the screws with a 10mm socket wrench and disengage the light from the body, using a plastic trim tool for assistance. To extract a bulb, simply rotate the socket counterclockwise. Repeat the process for the opposite light if necessary.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the outside rearview mirror on a Chevrolet Equinox, first remove the door panel by loosening the bolt located at the internal handle. Once…
How to Replace the Front Wipers on the Chevrolet Equinox 2
How to Replace the Front Wipers on the Chevrolet Equinox 2
Chevrolet Equinox (2010-2017 / MK 2) Follow this step-by-step guide to remove and replace the front wipers on the second generation Chevrolet Equinox. First, move to the front of your ve…
Where are the fuses located in the Chevrolet Equinox?
Where are the fuses located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) The fuses in the Chevrolet Equinox are located within the dedicated fuse boxes present in the vehicle. This model has two: one is inside the cabin, o…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos