Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : Light bulb

Chevrolet Equinox - Light bulb

Light Bulb Chevrolet Equinox (2010-2017 / mk 2)

Chevrolet Equinox (2010-2017 / MK 2)
How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
To replace the rear headlight bulb on a Chevrolet Equinox, open the trunk to access the screws located between the headlight and the seal. After loosening the …Read all…
Posted on 8 August 2026 by ScegliAuto
Chevrolet Equinox (2010-2017 / MK 2)
How to Replace the Headlight Bulb on the Chevrolet Equinox
To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. Once the …Read all…
Posted on 24 June 2026 by ScegliAuto
Airbag (3) Speaker (1) Shocks (1) Car stereo (1) Battery (7) Spark plugs (3) Body (2) Key (20) A/C controls (1) Checks and maintenance (4) MAF sensor (1) Headlight (4) Tail light (1) Air filter (7) Cabin air filter (8) Oil filter (1) Light bulb (2) Headlight bulb (2) Tail light bulb (2) Antifreeze coolant (2) License plate light (2) Handle (2) Starter motor (2) Engine oil (1) Clock (1) Door trim panel (2) Front bumper (3) Brake pads (1) Car door (1) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (8) Seat (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (2) (6) Tire pressure warning light (1) Service warning light (10) Windshield wipers (5) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos