Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: License plate light

See other generations:
Video tutorial

To replace the license plate bulb on a Chevrolet Equinox, use a lever tool to pry the light assembly above the license plate from its housing. Once removed, pull out the bulb inside and disconnect it from the connector.

Connect the new bulb to the connector and insert it back into the light assembly. The assembly can now be snapped back into place above the license plate, and you can repeat the process for the other bulb.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the License Plate Lights in a Chevrolet Equinox
How to Replace the License Plate Lights in a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) Today, see how to replace the license plate lights in a Chevrolet Equinox and how to remove the bulb cover. Use a plastic pry tool to leverage the cl…
How to Replace the Headlight Bulb on the Chevrolet Equinox
How to Replace the Headlight Bulb on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. On…
How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
How to Replace the Rear Headlight Bulb on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the rear headlight bulb on a Chevrolet Equinox, open the trunk to access the screws located between the headlight and the seal. After loos…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos