Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Suburban
    4. : How can drawers be made in the trunk of the Chevrolet Suburban?

Chevrolet Suburban - Video tutorial

Model: Chevrolet Suburban Gmt800 - Years 2000-2006
Part: Checks and maintenance
Operation: How can drawers be made in the trunk of the Chevrolet Suburban?

What this video explains serves to illustrate the step-by-step process for making custom-made storage drawers inside the luggage compartment. The material used is wood, both for the chest of drawers and for the drawers themselves. We start by measuring the internal space, from the tailgate to the rear seat backrest, then cut the wood to size as follows: Base panel, closure panel and partition, joining them together with screws, using a rechargeable screwdriver. Having tested the latter in the car, we proceed with taking the measure of the drawers and cutting the wood in the appropriate measures, completing the work with the assembly of the aforementioned pieces always with the screws. Once these have also been inserted into the structure and the last finishing touches have been made, the work can be considered finished.


Posted on 14 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos