Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Chevrolet Beat

Model: Chevrolet Beat MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

Video tutorial

If you notice that one of the front headlights is not working, you can proceed with its replacement by following the instructions in this description and the video. First, open the hood, locate the headlight with the burnt-out bulb, disconnect the electrical connector, and remove the rubber cover located behind the headlight.

Then, unclip the bulb retaining clip to extract it. Take the new bulb, being careful not to touch the glass with your fingers, and reposition it in the housing. Reattach the clip, reinstall the rubber cap, and finally reconnect the electrical connector.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Chevrolet Beat
How to Remove the Front Bumper of the Chevrolet Beat
Chevrolet Beat (2010-2021 / MK 1) This guide briefly explains how to remove and replace the front bumper of the Chevrolet Beat. First, open the hood of your car and start removing all…
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) As shown in this tutorial, replacing the cabin filter on a Chevrolet Beat is an extremely simple and quick task. Start by sitting in the passenger se…
How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos