Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Lights on a Chevrolet Beat

Model: Chevrolet Beat MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

Video tutorial

To customize your vehicle by replacing the halogen headlight bulbs with equivalent LED types, follow the instructions below and refer to the video. First, open the hood, locate the headlight where you will replace the bulb, disconnect the electrical connector, remove the rubber protective cover, and release the clip holding the bulb.

Pull out the bulb and take the new one, insert it into the housing, secure it with the clips, and connect the new power supply to the vehicle's connector. Repeat the same procedure to replace all the bulbs.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulbs on a Chevrolet Beat?
How to Replace the Third Brake Light Bulbs on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) The third brake light on the Chevrolet Beat consists of four bulbs. If one of these burns out, the other three will continue to work, but it is still…
How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…
How to Replace the Shock Absorbers on a Chevrolet Beat
How to Replace the Shock Absorbers on a Chevrolet Beat
Chevrolet Beat (2010-2021 / MK 1) To replace the shock absorbers on a Chevrolet Beat, lift the car with a jack or a lift so that the wheel corresponding to the shock absorber being re…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos