Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuse Box in a Chevrolet Spark?

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
Video tutorial

This vehicle has two fuse boxes; the first is located in the engine compartment on the right side next to the battery, while the second is located inside the cabin at the lower part of the dashboard near the driver's door and is protected by a plastic cover.

The fuse for the cigarette lighter, which is the power socket in this vehicle, is marked with the number 21 and is found in the fuse box located in the cabin.

For the complete list of fuses and their diagram, refer to the instruction and maintenance manual.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Chevrolet Spark located?
Where is the fuse box of the Chevrolet Spark located?
Chevrolet Spark (2009-2016 / MK 1, M300) The Chevrolet Spark (called Matiz in some countries) produced from 2013 to 2015 contains two fuse boxes. The first fuse box is located inside the eng…
What is the fuse layout for the Chevrolet Spark?
What is the fuse layout for the Chevrolet Spark?
Chevrolet Spark (2016-2022 / M400) In this video we can see where the fuse boxes of the Chevrolet Spark are located and what are the respective diagrams, to consult in case we need to …
What is the Fuse Diagram for the Chevrolet Spark?
What is the Fuse Diagram for the Chevrolet Spark?
Chevrolet Spark (2016-2022 / M400) In this video, see where the fuse boxes are located in the Chevrolet Spark and their respective diagrams, which can be consulted if you need to check…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos