Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : Trunk lock

Citroen Berlingo - Trunk lock

Trunk Lock Citroen Berlingo (2008-2018 / mk 2)

Citroen Berlingo (2008-2018 / MK 2)
Removing the Boot Lock on a Citroen Berlingo
Today's instructions will show you the steps to remove and replace the boot lock on the Citroen Berlingo. First, open the tailgate and begin to remove the …Read all…
Posted on 30 August 2026 by ScegliAuto
Accelerator (1) Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (1) Antenna (1) Car stereo (9) Anti-roll bar (1) Battery (7) Transmission (3) Spark plugs (2) Glow plugs (1) Body (4) Control unit (2) Key (6) Trunk lock (1) Timing belt (9) V-belt (2) Air conditioner (2) A/C controls (1) Onboard computer (4) Checks and maintenance (23) Dashboard (7) Brake rotors (2) Headlight (9) Tail light (7) Fog lights (1) Air filter (7) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (10) Oil filter (1) Parking brake (1) Clutch (8) Grille (1) Light bulb (1) Headlight bulb (15) Tail light bulb (8) Antifreeze coolant (2) Instrument panel light (2) License plate light (6) (1) Handle (6) Exhaust muffler (1) Engine (1) Starter motor (2) Electric power steering motor (1) Engine oil (2) Clock (27) Door trim panel (16) Front bumper (5) Rear bumper (4) Brake pads (1) Tires (2) Shift knob (3) Pump (1) Car door (7) Push button (1) Instrument cluster (9) Radiator (1) Heater core (4) Wheel (5) Fuse box (50) Seat (14) Axle shaft (2) Door lock (6) Side mirror (7) AdBlue warning light (11) Warning light – error code (10) Tire pressure warning light (44) Service warning light (86) Windshield wipers (3) Thermostat (1) Cylinder head (1) Drivetrain (1) Turbocharger (1) Blower motor (6) Side window (1) Steering wheel (9)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos