Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : Control unit

Citroen Berlingo - Control unit

Control Unit Citroen Berlingo (1996-2013 / mk 1)

Citroen Berlingo (1996-2013 / MK 1)
How to restore the BSI unit of the Citroen Berlingo
In this guide, we will see the main instructions on how to disassemble and restore the BSI unit of the Citroen Berlingo, as well as the Peugeot Partner; we …Read all…
Posted on 3 January 2025 by ScegliAuto
Citroen Berlingo (1996-2013 / MK 1)
How to Remove the ECU from a Citroën Berlingo?
To replace the ECU on a Citroën Berlingo, open the bonnet to access the engine bay and detach the cover from the top of the fuse box. This will need to be …Read all…
Posted on 2 August 2026 by ScegliAuto
Accelerator (1) Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (1) Antenna (1) Car stereo (9) Anti-roll bar (1) Battery (7) Transmission (3) Spark plugs (2) Glow plugs (1) Body (4) Control unit (2) Key (6) Trunk lock (1) Timing belt (9) V-belt (2) Air conditioner (2) A/C controls (1) Onboard computer (4) Checks and maintenance (23) Dashboard (7) Brake rotors (2) Headlight (9) Tail light (7) Fog lights (1) Air filter (7) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (10) Oil filter (1) Parking brake (1) Clutch (8) Grille (1) Light bulb (1) Headlight bulb (15) Tail light bulb (8) Antifreeze coolant (2) Instrument panel light (2) License plate light (6) (1) Handle (6) Exhaust muffler (1) Engine (1) Starter motor (2) Electric power steering motor (1) Engine oil (2) Clock (27) Door trim panel (16) Front bumper (5) Rear bumper (4) Brake pads (1) Tires (2) Shift knob (3) Pump (1) Car door (7) Push button (1) Instrument cluster (9) Radiator (1) Heater core (4) Wheel (5) Fuse box (50) Seat (14) Axle shaft (2) Door lock (6) Side mirror (7) AdBlue warning light (11) Warning light – error code (10) Tire pressure warning light (44) Service warning light (86) Windshield wipers (3) Thermostat (1) Cylinder head (1) Drivetrain (1) Turbocharger (1) Blower motor (6) Side window (1) Steering wheel (9)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos