Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the BSI unit of the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Control unit

See other generations:
This video is currently unavailable

In this guide, we will see the main instructions on how to disassemble and restore the BSI unit of the Citroen Berlingo, as well as the Peugeot Partner; we remind you that the BSI module includes the fuse box and relays. To be able to restore the BSI module, it is necessary first to remove it, disconnecting the various electrical connections; we then connect the BSI module to the computer, where we will perform a forced reset using diagnostic software, as shown in the video.

Finally, we reassemble the BSI unit on the vehicle, verifying its correct operation.


Posted on 2 January 2025 by ScegliAuto


Related tutorials

How to Reset the BSI of the Citroen Berlingo - Peugeot Partner Tepee
How to Reset the BSI of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (1996-2013 / MK 1) This guide will show you the main steps to reset the BSI of the Citroen Berlingo and the Peugeot Partner Tepee. First, you will need to use a diagnos…
How to Disable the Immobiliser on the Citroen Berlingo
How to Disable the Immobiliser on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, learn how to disable the immobiliser on the Citroen Berlingo in case of emergency. First, open the bonnet of the vehicle and begin to …
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) In this short guide, we will see how to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi. First of all, we get into the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos