Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI of the Citroen Berlingo - Peugeot Partner Tepee

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Warning light – error code

This guide will show you the main steps to reset the BSI of the Citroen Berlingo and the Peugeot Partner Tepee. First, you will need to use a diagnostic tool to reset the data from the control unit, removing it from the vehicle. Once you have indicated the model and engine type, you can proceed with programming and resetting the BSI, as shown in the video. At this point, reinstall the control unit in the vehicle, ensuring that the operation was successful.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee
Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) .. external fuses of the Citroen Berlingo and the Peugeot Partner Tepee. First, open the bonnet of the vehicle and locate the fuse box, situated at the.. …
Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) .. panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the front door and start removing the plastic cover of the opening.. …
How to replace the wheel with the spare one of the Citroen Berlingo - Peugeot Partner Tepee
How to replace the wheel with the spare one of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (1996-2013 / MK 1) .. wheel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, we open the rear doors and begin to take out the wheel replacement kit,.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Berlingo 2008-2018 - How to reset the radio of the Citroen Berlingo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos