Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the ECU from a Citroën Berlingo?

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Control unit

See other generations:
Video tutorial

To replace the ECU on a Citroën Berlingo, open the bonnet to access the engine bay and detach the cover from the top of the fuse box. This will need to be moved by loosening the screws that secure it to its housing, as the ECU is located underneath.

To remove it, disconnect all connectors attached to it and remove the protective cap: at this point, you can slide the ECU out of its housing and replace it with a new spare part.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to restore the BSI unit of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this guide, we will see the main instructions on how to disassemble and restore the BSI unit of the Citroen Berlingo, as well as the Peugeot Partn…
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) In this short guide, we will see how to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi. First of all, we get into the …
How to Disable the Immobiliser on the Citroen Berlingo
How to Disable the Immobiliser on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this guide, learn how to disable the immobiliser on the Citroen Berlingo in case of emergency. First, open the bonnet of the vehicle and begin to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos