Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Fuses in a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Fuse box

To locate the fuses in a Citroen Berlingo, check two main areas. The fuse box in the cabin is located at the bottom of the dashboard on the driver's side. To access it, remove the cover panel under the dashboard and access the fuses for the main internal devices. A second group is located in the engine compartment, near the battery, inside a box protected by a plastic cover. Before carrying out any checks, switch off the engine, remove the key, and disconnect all electrical devices. Consult the fuse diagram on the cover or in the vehicle manual to identify the one related to the circuit in question. If a fuse is blown, remove it and replace it only with one of the same amperage.

Posted on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee
Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) This guide covers the location and diagram of the external fuses of the Citroen Berlingo and the Peugeot Partner Tepee. First, open the bonnet of the…
Where is the fuse box of the Citroen Berlingo located?
Where is the fuse box of the Citroen Berlingo located?
Citroen Berlingo (2008-2018 / MK 2) The Citroen Berlingo has two fuse boxes inside. The first fuse box is located inside the front hood, specifically next to the engine and the battery.…
Where are the Fuses on the Citroën Berlingo?
Where are the Fuses on the Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) The fuses on the Citroën Berlingo are located inside the designated fuse boxes installed within the vehicle. In this model, the first box is position…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos