Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and Diagram of the External Fuses of the Citroen Berlingo - Peugeot Partner Tepee

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

This guide covers the location and diagram of the external fuses of the Citroen Berlingo and the Peugeot Partner Tepee. First, open the bonnet of the vehicle and locate the fuse box, situated at the top right (next to the battery); remove the plastic cover to access it, as shown in the video.

At this point, you will find the fuse diagram inside the cover, which is also available in the vehicle's user and maintenance manual; it will associate each fuse with a code and its respective amperage!


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Reset the BSI of the Citroen Berlingo - Peugeot Partner Tepee
How to Reset the BSI of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (1996-2013 / MK 1) .. to reset the BSI of the Citroen Berlingo and the Peugeot Partner Tepee. First, you will need to use a diagnostic tool to reset the data from the control.. …
Removing the Front Door Panel of the Citroen Berlingo - Peugeot Partner Tepee
Removing the Front Door Panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) .. panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, open the front door and start by removing the plastic cover of the opening.. …
How to Bleed the Cooling System of the Citroen Berlingo - Peugeot Partner Tepee 1.6 HDi
How to Bleed the Cooling System of the Citroen Berlingo - Peugeot Partner Tepee 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) .. system of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First, open the bonnet of the vehicle and locate the coolant bleed valve, situated.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos