Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Drivetrain

In this short guide, we will see how to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi. First of all, we get into the car and start connecting our diagnostic tool to the OBD port; we turn on the instrument panel to allow it to communicate with the engine control unit. At this point, we proceed to scan for errors, testing the control unit and the gearbox actuators; then we reset the transmission and verify its correct operation on the road afterwards.

Posted on 29 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Engine Block from a Citroen Berlingo 1.6 HDi
Guide to Removing the Engine Block from a Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) Below are the main instructions for removing the entire engine block from the Citroen Berlingo 1.6 HDi. First, open the bonnet of the vehicle and beg…
When and How to Change the Timing Belt on a Citroen Berlingo
When and How to Change the Timing Belt on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below are the details on when and how to replace the timing belt on a Citroen Berlingo; for the 1.6 HDI engine, the manufacturer recommends replacing…
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) Below we will see the main instructions that will allow us to disassemble and replace the turbocharger of the Citroen Berlingo 1.6 HDi. First, we ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos