Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the stiff gear lever on the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission

See other generations:
Video tutorial

In this video we can see how to remedy the problem of the stiff gear lever on the Citroen Berlingo. The vehicle must be lifted in order to check the underlying linkages of the mechanism.

A good spray of WD-40 certainly helps to unlock the levers, but unfortunately does not solve the problem. So we will have to unscrew the junction nut, and check the mechanism to see where the problem occurs.

In fact, continuing on we find another very rusty articulation point, on which we spray more WD-40 and move it gently for a few minutes. We reconnect the mechanism and try the functionality of the lever again, which is now okay.

But there was another point where we could have operated, and the youtuber shows us: we should have accessed it from the engine compartment, and lubricated the nut that the video enlarges to show us better.


Posted on 24 May 2025 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a 2014 Citroen Berlingo
How to Replace the Gear Knob on a 2014 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) If the gear knob in your 2014 Citroen Berlingo is worn out and you want to replace it with a new one, simply follow the procedure below to complete t…
How does the adaptive cruise control of the Citroen Berlingo Van work?
How does the adaptive cruise control of the Citroen Berlingo Van work?
Citroen Berlingo (2018-2026 / MK 3) In this video made directly by Citroen, we see how the adaptive speed regulator works on the Berlingo Van: this device, in the presence of the EAT8 g…
How to Remove the Table from a Citroen Berlingo
How to Remove the Table from a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) The manufacturer of the Citroen Berlingo has designed it with the comfort of drivers and passengers in mind, providing not only comfortable seats and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos