Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a 2014 Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

See other generations:
Video tutorial

If the gear knob in your 2014 Citroen Berlingo is worn out and you want to replace it with a new one, simply follow the procedure below to complete the task without difficulty. First, ensure you purchase a new gear knob that is fully compatible with your vehicle, then go inside the cabin.

At this point, remove the faux-leather cover and break the safety hook with pliers. Once done, pull upwards on the gear knob until it is completely removed.

Finally, fit the new knob and you are done.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to change the clutch cable of a Citroen Berlingo
How to change the clutch cable of a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) To replace the clutch cable of a Citroen Berlingo car, you will need the following accessories: socket set with ratchet wrenches, pliers, screwdriver…
Change the gear knob on the Citroen Berlingo MK2
Change the gear knob on the Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) To replace the worn gear knob on the Citroen Berlingo, sit in the driver's seat, detach the base of the leather gaiter and lift it up, cut the Velcro…
How to Dismantle the Gear Knob on a Citroen Berlingo 2
How to Dismantle the Gear Knob on a Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) Have you ever noticed deep wear or a possible crack in the gear knob of a car? There is a remedy for this problem: replacing it yourself at a low cos…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos