Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Gear Knob on a Citroen Berlingo 2

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission

See other generations:
Video tutorial

Have you ever noticed deep wear or a possible crack in the gear knob of a car? There is a remedy for this problem: replacing it yourself at a low cost. It is sufficient to carefully watch the video and realise how simple it is, both on a Citroen Berlingo 2 and any other vehicle, as the demonstration was done on an Opel Meriva, with the procedure being identical.

Use a utility knife to cut the old knob into several pieces, clean the area where the new one will be installed, then position the new knob and push it firmly to install it.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a 2014 Citroen Berlingo
How to Replace the Gear Knob on a 2014 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) If the gear knob in your 2014 Citroen Berlingo is worn out and you want to replace it with a new one, simply follow the procedure below to complete t…
Guide to Replacing the Gear Knob on the Citroen Berlingo
Guide to Replacing the Gear Knob on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Briefly, you will see the instructions on how to remove and replace the manual gear knob on the Citroen Berlingo. First, get inside the vehicle and g…
How to Replace the Gear Knob in a Citroen Berlingo Van?
How to Replace the Gear Knob in a Citroen Berlingo Van?
Citroen Berlingo (1996-2013 / MK 1) In this tutorial, you will see how to replace the gear knob in a Citroen Berlingo van, a very simple and quick operation. First, grip the base of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos