Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Gear Knob on the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

See other generations:
Video tutorial

Briefly, you will see the instructions on how to remove and replace the manual gear knob on the Citroen Berlingo. First, get inside the vehicle and gently detach the cover of the gear gaiter from the base, prising it off from the sides; then, pull the gear knob upwards with force to detach and remove it from the lever, disconnecting any plastic clip between the knob and the gaiter, as shown in the video.

Now, install the new gear knob onto the lever, securing the gaiter first and fastening everything with a clip if necessary.


Posted on 23 April 2026 by ScegliAuto


Related tutorials

Change the gear knob on the Citroen Berlingo MK2
Change the gear knob on the Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) To replace the worn gear knob on the Citroen Berlingo, sit in the driver's seat, detach the base of the leather gaiter and lift it up, cut the Velcro…
How to Replace the Gear Knob on a 2014 Citroen Berlingo
How to Replace the Gear Knob on a 2014 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) If the gear knob in your 2014 Citroen Berlingo is worn out and you want to replace it with a new one, simply follow the procedure below to complete t…
How to Dismantle the Gear Knob on a Citroen Berlingo 2
How to Dismantle the Gear Knob on a Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) Have you ever noticed deep wear or a possible crack in the gear knob of a car? There is a remedy for this problem: replacing it yourself at a low cos…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos