Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Berlingo
  6. : Drivetrain

Citroen Berlingo - Drivetrain

Drivetrain Citroen Berlingo (2008-2018 / mk 2)

Citroen Berlingo (2008-2018 / MK 2)
How to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi

In this short guide, we will see how to reset the automatic transmission control unit of the Citroen Berlingo 1.6 HDi. First of all, we get into the car and …Read all…
Posted on 29 August 2025 by ScegliAuto

Accelerator (1) Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (1) Antenna (1) Car stereo (9) Anti-roll bar (1) Battery (7) Transmission (3) Spark plugs (2) Glow plugs (1) Body (4) Control unit (2) Key (6) Trunk lock (1) Timing belt (9) V-belt (2) Air conditioner (2) A/C controls (1) Onboard computer (4) Checks and maintenance (23) Dashboard (7) Brake rotors (2) Headlight (8) Tail light (7) Fog lights (1) Air filter (7) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (10) Oil filter (1) Parking brake (1) Clutch (8) Grille (1) Light bulb (1) Headlight bulb (15) Tail light bulb (7) Antifreeze coolant (1) Instrument panel light (2) License plate light (6) (1) Handle (6) Exhaust muffler (1) Engine (1) Starter motor (2) Electric power steering motor (1) Engine oil (1) Clock (26) Door trim panel (16) Front bumper (5) Rear bumper (4) Brake pads (1) Tires (2) Shift knob (3) Pump (1) Car door (7) Push button (1) Instrument cluster (9) Radiator (1) Heater core (4) Wheel (5) Fuse box (49) Seat (14) Axle shaft (2) Door lock (6) Side mirror (7) AdBlue warning light (11) Warning light – error code (10) (34) Tire pressure warning light (9) Service warning light (84) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) Blower motor (6) Side window (1) Steering wheel (8)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos