Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Boot Lock on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Trunk lock

See other generations:
Video tutorial

Today's instructions will show you the steps to remove and replace the boot lock on the Citroen Berlingo. First, open the tailgate and begin to remove the plastic panel by unscrewing all the securing screws; then you will find the lock underneath, where you will disconnect the electrical connector and unscrew its screws to remove it, as shown in the video.

At this point, install the new boot lock, ensuring it is perfectly aligned; then check the closure of the tailgate!


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Repair the Lock on a Citroen Berlingo
How to Repair the Lock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) To remove the lock from the Citroen Berlingo, there is a small access point in the thickness of the door that allows a screwdriver to enter and unscr…
How to Remove the Lock from a Citroen Berlingo 1
How to Remove the Lock from a Citroen Berlingo 1
Citroen Berlingo (1996-2013 / MK 1) In this guide, we will see how to remove and replace the lock from the first series Citroen Berlingo, following the instructions below. First, open t…
How to Open the Rear Tailgate of the Citroen Berlingo
How to Open the Rear Tailgate of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Let's briefly see how to open the rear hatch or tailgate of the Citroen Berlingo, as well as the Peugeot Partner Tepee. The tailgate of this vehicle …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos