Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Lock on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Door lock

To remove the lock from the Citroen Berlingo, there is a small access point in the thickness of the door that allows a screwdriver to enter and unscrew the lock from the handle. Once you have freed the screw, simply pull the lock towards you, and it will come away easily. You may choose to purchase a new lock and replace it (they can be found for under £20 with 2 spare keys on major e-commerce platforms), but the video shows how to repair it at no cost. Essentially, they file down the rotating parts of the lock, then reassemble it, and it works! Decide how you wish to proceed with the job.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Lock from a Citroen Berlingo 1
How to Remove the Lock from a Citroen Berlingo 1
Citroen Berlingo (1996-2013 / MK 1) In this guide, we will see how to remove and replace the lock from the first series Citroen Berlingo, following the instructions below. First, open t…
Removing the Boot Lock on a Citroen Berlingo
Removing the Boot Lock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today's instructions will show you the steps to remove and replace the boot lock on the Citroen Berlingo. First, open the tailgate and begin to remov…
Replacing the Lock on Citroen Berlingo
Replacing the Lock on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Open the door and remove the dust cover plate on the side, which prevents access to the lock. Use a flat screwdriver to pry it off. Using a small scr…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos