Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lock from a Citroen Berlingo 1

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Door lock

In this guide, we will see how to remove and replace the lock from the first series Citroen Berlingo, following the instructions below. First, open the front door and start by unscrewing the side screws of the lock using a Torx screwdriver; then remove the front door panel by unscrewing the screws located on the sides. At this point, access the inside of the door by disengaging the lock mechanism; then simply remove it and replace it with the new module, applying the reverse procedure for reassembly!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Boot Lock on a Citroen Berlingo
Removing the Boot Lock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today's instructions will show you the steps to remove and replace the boot lock on the Citroen Berlingo. First, open the tailgate and begin to remov…
How to Repair the Lock on a Citroen Berlingo
How to Repair the Lock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) To remove the lock from the Citroen Berlingo, there is a small access point in the thickness of the door that allows a screwdriver to enter and unscr…
Replacing the Lock on Citroen Berlingo
Replacing the Lock on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Open the door and remove the dust cover plate on the side, which prevents access to the lock. Use a flat screwdriver to pry it off. Using a small scr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos