Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lock on Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door lock

See other generations:
Video tutorial

Open the door and remove the dust cover plate on the side, which prevents access to the lock. Use a flat screwdriver to pry it off. Using a small screw or another small tool, remove the metal clip inside the door, as shown in the video.

This will allow you to extract and disconnect the lock. Reverse the process for reassembly, knowing that some force may be required to insert the new lock.

Refit the metal clip and the side cover. For more complex door replacements, you will need to remove the panel.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Remove the Lock from a Citroen Berlingo 1
How to Remove the Lock from a Citroen Berlingo 1
Citroen Berlingo (1996-2013 / MK 1) In this guide, we will see how to remove and replace the lock from the first series Citroen Berlingo, following the instructions below. First, open t…
Removing Ignition Barrel on Citroen Berlingo
Removing Ignition Barrel on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this video tutorial, you will learn how to remove the ignition barrel from a Citroen Berlingo. First, get inside the vehicle and remove the plasti…
Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos