Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Ignition Barrel on Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013

In this video tutorial, you will learn how to remove the ignition barrel from a Citroen Berlingo. First, get inside the vehicle and remove the plastic cover that conceals the ignition cylinder. Then, disconnect the electrical connector of the barrel and use a metal punch to remove the rivet of the barrel, allowing you to separate it from the rest of the steering column. Now, extract the barrel and replace it with a new one, reassembling it in the correct orientation; apply the reverse procedure of disassembly for reassembly of the parts.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on a Citroën Berlingo?
How do you reset the Service light on a Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) On the instrument panel of the Citroën Berlingo, it will be possible to completely turn off the Service light by pressing and holding the button loca…
How to Reset the Service Interval on the Citroen Berlingo
How to Reset the Service Interval on the Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) On the Citroen Berlingo, the maintenance interval reset is performed with the engine off. With the Citroen Berlingo stationary, press and hold the "0…
How to Remove the External Wing Mirror from a Citroen Berlingo
How to Remove the External Wing Mirror from a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Before you can start, open the front door of your Citroen Berlingo. Start by unfastening and removing the inner cover located near the wing mirror. B…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos