Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Jumpy
  6. : Cabin air filter

Citroen Jumpy - Cabin air filter

Citroen Jumpy (2007-2016 / MK 2)
How do you replace the cabin filter of the Citroën Jumpy?

In order to replace the cabin filter of the Citroën Jumpy, you need to open the hood to access the components located inside the engine compartment. On the …read all…
Posted on 25 August 2023 by ScegliAuto
Citroen Jumpy (2007-2016 / MK 2)
How to replace the pollen filter on a Citroen Jumpy II.

In this video tutorial, we can see how it is possible to replace the pollen filter on a Citroen Jumpy II, following some simple steps: the filter replacement …read all…
Posted on 29 June 2023 by ScegliAuto
Citroen Jumpy (2016-2024 / MK 3)
How to replace the cabin filter in the Citroen Jumpy van?

In this tutorial we can see how to replace the cabin filter in the Citroen Jumpy van, an extremely simple and economical operation. We start by positioning …read all…
Posted on 10 June 2023 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
Replacing the cabin air filter

The replacement of the pollen filter of your car is part of the not too complicated replacement operations that with a minimum of attention can also be carried …read all…
Posted on 12 September 2023 by ScegliAuto
Citroen Jumpy (1994-2007 / MK 1)
Cabin air filter replacement

The passenger compartment air filter is located in the engine compartment, in a central position, immediately under the passenger compartment; once the bonnet …read all…
Posted on 30 August 2023 by ScegliAuto

-board computer (3) Checks and maintenance (10) Cabin air filter (5) Diesel filter (1) Light bulb (1) Engine (1) Engine oil (1) Tires (1) Instrument cluster (2) Fuse box (9) Suspensions (1) Interior blower (1) Steering wheel (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos