Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Citroen Jumpy MK3

Model: Citroen Jumpy MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this video we can see how to replace the cabin air filter of the Citroen Jumpy: the drawer to access this component is located in the central console, and can be accessed from the footwell on the passenger side. We will need to remove the partition located in the central part, and here in the upper part of the console, we will find a small black cover that covers the access to the filter compartment.

Let's remove it and clean the compartment well from dust and residue, in order to introduce the new filter in a clean place. Pay attention to insert it in the right direction (pay attention to the arrows printed above) and then close the door and then the partition.

Job done.


Posted on 21 December 2024 by ScegliAuto


Related tutorials

How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …
How to replace the cabin filter in the Citroën Jumpy?
How to replace the cabin filter in the Citroën Jumpy?
Citroen Jumpy (2007-2016 / MK 2) To replace the cabin filter in the Citroën Jumpy, open the bonnet to access the components inside the engine bay: on the right side, just below the w…
How to Replace the Pollen Filter on Citroen Jumpy II
How to Replace the Pollen Filter on Citroen Jumpy II
Citroen Jumpy (2007-2016 / MK 2) In this video tutorial, see how to replace the pollen filter on Citroen Jumpy II by following these simple steps: the filter should be replaced every…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos