Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Citroen Jumpy Van?

Model: Citroen Jumpy MK 3 - Years 2016-2026
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in the Citroen Jumpy van, an extremely simple and cost-effective operation. Start by sitting in the passenger seat, then open the upper glove compartment and unscrew the 4 screws around its perimeter. Next, remove the interior light, pull the compartment from the dashboard, and locate the long rectangular cover at the back, towards the engine bay. At this point, open the cover by unlocking the lower clip, remove the old filter, and insert the new one, ensuring it is the correct way round.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Citroën Jumpy?
How to replace the cabin filter in the Citroën Jumpy?
Citroen Jumpy (2007-2016 / MK 2) To replace the cabin filter in the Citroën Jumpy, open the bonnet to access the components inside the engine bay: on the right side, just below the w…
How to Replace the Pollen Filter on Citroen Jumpy II
How to Replace the Pollen Filter on Citroen Jumpy II
Citroen Jumpy (2007-2016 / MK 2) In this video tutorial, see how to replace the pollen filter on Citroen Jumpy II by following these simple steps: the filter should be replaced every…
How to Reset the Service Light in a Citroen Jumpy Van?
How to Reset the Service Light in a Citroen Jumpy Van?
Citroen Jumpy (2016-2026 / MK 3) In this tutorial, you will see how to reset the service light in a Citroen Jumpy van, a very simple and quick operation that should only be done afte…

Other guides you may be interested in

    Frequently Asked Questions

    • Jumpy 1994-2007 - How to replace the pollen filter on Citroen Jumpy? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos