Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why does the ECO mode on the Citroen C3 not work?

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

This video is currently unavailable

When the ECO mode on a Citroen C3 vehicle does not start, the cause could be due to the fuse not functioning. In cases like this, to restart the ECO mode, it is necessary to replace the fuse.

The fuse in question is located inside the fuse box in the front hood; the fuse is number 25 with 30 Amps and yellow Amber color. To replace the fuse, we need to open the box and then remove it using needle-nose pliers.

After removing the fuse, the mode will be completely deactivated. Simply insert a new fuse with the same amperage to restart the mode.


Posted on 17 September 2024 by ScegliAuto


Related tutorials

How to deactivate the eco mode of the Citroen C3
How to deactivate the eco mode of the Citroen C3
Citroen C3 (2002-2009 / FN, FC) In today's article, we will see how to deactivate the eco mode of the Citroen C3. This mode indicates an electrical fault, so in order to solve it an…
Deactivating Eco Mode on the Citroen C3
Deactivating Eco Mode on the Citroen C3
Citroen C3 (2016-2023 / SX, SY) Eco mode, better known as "start & stop", is a system that saves fuel by turning off the car's engine whenever it remains stationary for a certain nu…
How do you deactivate the Eco mode of the Citroen C3?
How do you deactivate the Eco mode of the Citroen C3?
Citroen C3 (2009-2016 / SC) The Eco mode present in Citroen cars in general, even though in this specific case we are talking about the Citroen C3, is used to preserve the charg…

    Frequently Asked Questions

    • C3 2009-2016 - Where is the petrol pump relay located in the Citroen C3? Read answer

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos