|
Do it yourself
| |||
| ||||
Replacing the Front Headlamp Bulbs on the Citroen Berlingo
Model: Citroen Berlingo
MK 1
- Years:
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Today's steps will show you how to remove and replace the front headlamp bulb on the Citroen Berlingo. First, open the bonnet of the vehicle and start by removing the plastic cover protecting the bulbs located at the back of the headlamp; then disconnect the electrical connector of the bulb and unclip the metal spring to remove it, as shown in the video. At this point, install the new bulb of the correct type (in this case, H4); secure it properly and connect it, finally refitting the plastic cover!
Updated on 24 October 2026 by ScegliAuto
Related tutorials
Citroen Berlingo
(1996-2013 /
MK 1)
Do you want to change the front light bulbs on a Citroen Berlingo and don’t know how to proceed with the disassembly? Let’s see how to do it in this …
Citroen Berlingo
(2008-2018 /
MK 2)
Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
Citroen Berlingo
(1996-2013 /
MK 1)
This guide explains what to do when the headlight bulbs are blown. Replace the bulbs of the headlight on a Citroen Berlingo. Lift the front cover, an…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |