Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag of the Citroen Nemo

Model: Citroen Nemo MK 1 - Years 2007-2017
Part: Airbag

Removing the driver's airbag on a 2008 Citroen Nemo vehicle is a simple and quick operation to be carried out independently. The steps to follow are: - insert a flat-tipped screwdriver into the side hole; - push the internal lever to the left using the screwdriver; - disconnect the airbag connector; - completely remove the central body; To install a new airbag system, you will need to follow the same procedure but in reverse, first reconnecting the connector of the central body and then pushing the system inside. It is advisable to disconnect the vehicle's battery during the entire operation.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Citroen Nemo located?
Where is the fuse box of the Citroen Nemo located?
Citroen Nemo (2007-2017 / MK 1) If you own a Citroen Nemo and want to find out where the box containing all the various fuses of the vehicle is located, then all you have to do is f…
How to remove the spare wheel from the Citroen Nemo
How to remove the spare wheel from the Citroen Nemo
Citroen Nemo (2007-2017 / MK 1) Here are the instructions to remove and replace the spare wheel on the Citroen Nemo. First, open the rear doors of the vehicle and gather the necessa…
The EuroNCap results for the Citroen Nemo (Peugeot Bipper and Fiat Fiorino)
The EuroNCap results for the Citroen Nemo (Peugeot Bipper and Fiat Fiorino)
Citroen Nemo (2007-2017 / MK 1) What we see is the proof of the safety test that Citroen did for the Nemo back in 2010. Credit where credit is due, because the Peugeot Bipper and Fi…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos