Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Tail light bulb

In this tutorial we can see how to replace the rear headlight bulbs in the Citroen C4 Picasso, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the trunk door and unhook the plastic cover on the inner edge of the headlight in question. Next, unscrew the two bolts that have just been released with a Torx T20 key, grab the headlight and separate it from the body by pulling it towards you. At this point, all that remains is to disconnect the connector, open the inner base, replace the faulty bulb, and reassemble everything.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Bulbs on Citroen Picasso
Replacing Front Bulbs on Citroen Picasso
Citroen C4 Picasso (2006-2013 / MK 1) How to replace the front bulbs if they are damaged? Here’s how to replace them from inside the headlamp of a C4 Picasso. Lift the front bonnet of the…
How to replace the license plate lights of the Citroen C4 Grand Picasso
How to replace the license plate lights of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today's step-by-step instructions will show us how to disassemble and replace the license plate bulbs of the Citroen C4 Grand Picasso. First, let's m…
Removing Bulbs on a Citroen C4 Picasso
Removing Bulbs on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Let’s look at removing the bulbs on a Citroen C4 Picasso. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos