Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the cabin of the Citroen Berlingo 3?

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Fuse box

If you are looking for the fuse box inside the cabin of your third generation Citroen Berlingo, then all you have to do is read the following steps and apply them step by step. First of all, enter the vehicle and make sure it is completely turned off, then proceed to remove the entire plastic panel located in the lower area of the dashboard. After removing the panel in question, you have free access to all the cabin fuses you were looking for, and the procedure can be considered successfully completed.

Posted on 15 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Citroen Berlingo 2024 located?
Where is the fuse box of the Citroen Berlingo 2024 located?
Citroen Berlingo (2018-2026 / MK 3) In this new guide, we will describe the few simple steps that you need to follow if you intend to locate the appropriate fuse box of your Citroen Ber…
How to access the internal fuse box of the Citroen Berlingo
How to access the internal fuse box of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below we will discover the positioning of the internal fuse box of the Citroen Berlingo, finding the diagram and the chart. First, we open the front …
Where is the OBD port located in the Citroen Berlingo van?
Where is the OBD port located in the Citroen Berlingo van?
Citroen Berlingo (2008-2018 / MK 2) In this video we can see where the OBD port is located in the Citroen Berlingo, useful for example in case we need to read the errors recorded by the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos