Do it yourself
Frequently asked questions about cars and motorcycles

Citroen C4 Aircross: how to reset the service light.

Model: Citroen C4 Aircross MK 1 - Years 2012-2017
Part: Service warning light

On the Citroen C4 Aircross, resetting the maintenance reminder is done with the ignition in the ON position and the engine off. With the instrument panel active, you use the normal navigation controls to reach the section dedicated to vehicle maintenance. From there, you select the service interval reset function and confirm when the system prompts you. This operation resets the mileage and time counters to their initial values; the service warning on the C4 Aircross will no longer be displayed on the main screen. To verify, you return to the same information area of the panel and check that the interval has been restored and is consistent with the new maintenance cycle. If confirmation is not successful, repeat the sequence, ensuring that the ignition is in the ON position and that the controls are held for the time indicated on the display.

Posted on 3 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 Aircross (2012-2017 / MK 1) The following video tutorial shows us how to reset the service light on a Citroën C4 Aircross. To reset it, you need to get into the vehicle and turn…
Citroen C4 Aircross (2012-2017 / MK 1) In this video we see how to reset the service light of the Citroen C4 Aircross: when we get into the car, we must make sure that all four doors, the …
Citroen C4 Aircross (2012-2017 / MK 1) Resetting the service light in the Citroen C4 Aircross is an extremely simple and quick operation; let's see how to proceed in this tutorial. Before …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos