Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Camera on the Citroen C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Accessory kit

See other generations:
Video tutorial

Today's instructions will guide you through the installation of the rear camera for parking manoeuvres on the Citroen C4 in simple steps. First, obtain the suitable camera for your car model; open the boot lid and start removing the interior trim by unscrewing the screws.

At this point, run the cable to the front, routing it behind the pillars until you reach the internal fuse box; install the display for viewing, then adjust the angle of the camera on the boot lid.


Posted on 27 March 2026 by ScegliAuto


Related tutorials

How to Install the Android Radio in the Citroen C4
How to Install the Android Radio in the Citroen C4
Citroen C4 (2004-2010 / MK 1) In this video tutorial, you will find the main instructions for installing the Android radio in the Citroen C4. First, get inside the vehicle and sta…
How to Install the Android Multimedia System on the Citroen C4 MK1
How to Install the Android Multimedia System on the Citroen C4 MK1
Citroen C4 (2004-2010 / MK 1) In this guide, you will learn how to install a 9-inch multimedia system on the first series Citroen C4; it allows access to all Android functions, in…
Replacing the Antenna on a Citroen C4
Replacing the Antenna on a Citroen C4
Citroen C4 (2004-2010 / MK 1) In this short and simple guide, we will see how to remove and replace the antenna and its base on a Citroen C4. First, get in the vehicle and start b…

How to Remove the Front Bumper on a Citroen C4 Picasso?

In this tutorial, see how to replace the front bumper on a Citroen C4 Picasso, a very simple and quick operation. First, open the bonnet, then locate the rivets on the upper edge of the grille and, using a flat-head screwdriver, remove them. Next, move underneath the bumper, unscrew all the fixing bolts, and proceed to remove the last screws, accessible from inside the wheel arches. At this point, grasp the bumper from one of the two ends, pull it outwards, and separate it from the chassis.

Watch the video!


by ScegliAuto

More videos