Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of a Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

The instructions in this guide will show you the procedure for removing and replacing the front door panel of the Citroen C4. First, open the front door of the vehicle and start by removing the window switch and the cover of the grab handle; disconnect the electrical connector located underneath.

At this point, unscrew the screws of the panel, prying the sides to detach it completely; disconnect the handle cable, making any necessary repairs or replacements.

Refit the door trim!


Posted on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel on a Citroen C4
How to Remove the Front Door Panel on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before you start, open the front door of your Citroen C4. Using a thin yet sturdy tool, begin by removing the inserts from the door panel. Next, unsc…
How to Remove the Front Door Panel on a Citroen C4
How to Remove the Front Door Panel on a Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide provides instructions for removing the front door panel on a Citroen C4. First, open the front door of the vehicle and unscrew all the fas…
Removing the Door Panel of a Citroen C4
Removing the Door Panel of a Citroen C4
Citroen C4 (2010-2018 / MK 2) Today, we will go through the instructions to remove and replace the front door panel of the Citroen C4, as well as the DS4. First, open the front do…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos