Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of a Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Door trim panel

Today, we will go through the instructions to remove and replace the front door panel of the Citroen C4, as well as the DS4. First, open the front door of the vehicle and start unscrewing the fastening screws located on the sides of the door panel; then, pry off the sides to detach it, disconnecting the opening handle cable and the electric connector for the window switch, as shown in the video. At this point, replace the door panel with a new one if necessary, applying the reverse procedure for reassembly!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of the Citroen C4 Cactus
Removing the Door Panel of the Citroen C4 Cactus
Citroen C4 (2014-2020 / Cactus) Here’s how to remove the front door panel of the Citroen C4 Cactus in simple steps. First, open the front door of the vehicle and start by removing t…
Removing the Front Door of the Citroen C4
Removing the Front Door of the Citroen C4
Citroen C4 (2004-2010 / MK 1) Today, in this video tutorial, we will see how to remove the right front door, which also applies to the left door, of the Citroen C4. First, open th…
How to Remove the Rear Door Panel of the Citroën C4?
How to Remove the Rear Door Panel of the Citroën C4?
Citroen C4 (2004-2010 / MK 1) To remove the door panel of the Citroën C4, loosen the screws that secure it to its housing: these screws are located next to the window lift lever a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos