Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Citroën Xsara Picasso?

Model: Citroen Xsara Picasso - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Clock

Video tutorial

You can adjust the clock on a Citroën Xsara Picasso by turning on the instrument cluster and turning the key in the ignition. Once activated, press the button with the book icon next to the small central display.

This will allow you to first modify the hours and then the minutes using the + button located below the book button; once both the hours and minutes have been adjusted, return to the initial screen to confirm the change and turn off the display.


Posted on 11 November 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Citroën Xsara Picasso?
How to Set the Clock on the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) To set the clock on the Citroën Xsara Picasso, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel…
How to Set the Clock on a Citroën Xsara Picasso?
How to Set the Clock on a Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) To set the clock on the Citroën Xsara Picasso, turn the key in the ignition to power on the instrument panel: once it is on, press the button with th…
How do you set the clock on the Citroën Xsara Picasso?
How do you set the clock on the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) On the central screen of the Citroën Xsara Picasso, the clock that appears can be adjusted by turning on the instrument panel by turning the key in t…

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos