Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : How do you set the clock on the Citroën Xsara Picasso?

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Checks and maintenance
Operation: How do you set the clock on the Citroën Xsara Picasso?

To set the clock of the Citroën Xsara Picasso, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, you can press and hold the button with the book icon located next to the display in the center of the dashboard. This will allow you to scroll until you select the "Hour" option and modify it using the + button. Then, you can scroll again to select the "Minutes" option, so that the minutes can be modified in the same way.


Posted on 26 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - Where is the fuse box on the Citroen Xsara Picasso 1.6 HDi located? Read Answer
    • Xsara Picasso 1999-2012 - Why does the Citroà «n Xsara Picasso display not light up? Read Answer
    • Xsara Picasso 1999-2012 - Where is the Citroà «n Xsara Picasso jack located? Read Answer
    • Xsara Picasso 1999-2012 - Why does the airbag warning light come on on Citroen Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - What are the spies of the Citroà «n Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Is it possible to connect a booster to the Citroà «n Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Where does the starter connect to the Citroà «n Xsara Picasso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos